The dual belt conveyor system DGF-P 2010 is designed for the transport of  pallets and bulky products. The belt is returned within the frame profile. T-slots on three sides offer plenty of options for mounting stops, side rails, sensors, stands, etc.

Specifications

      Frame:    50x100 m structural aluminum profile
      Width:    50 mm lane width
      Length:   500 mm (19.7”) to 10,000 mm (393.7”)
      Load:      Up to 200 lbs. (90 kg)
      Speed:    Up to 200 fpm (60 mpm)

Features/Benefits

• Constructed using our mk 2010 series structural profile
  • 100 mm (3.93”) tall anodized aluminum frame
  • Dual t-slot down the length of the frame per side
• UHMW-PE slider bed, 6 mm (0.24”) thick – guided for added belt tracking
• Single lane and multi-lane set ups.
• Maintenance free dual-sealed ball bearings
• Our 2010 Profile allows for the belt to return inside the frame
  • Ability to set conveyor directly on table top
  • Safer design
• Removable slot cover allows access to belt return
• Available in head and center-drive configurations
• All conveyor lengths are per your requirements – no preset lengths to choose from
• T-slots along the length of the conveyor for ease of mounting stands, side rails, and customer accessories
• Conveyor can operate in either direction – bi-directional
• Compatible with all mk 50 system profiles and components and most
  mk 40 system profiles and components
• Large selection of conveyor accessories – stands and side rails to name a few
• CE Models available