Aluminum Conveyors Proudly Made in the USA
mk conveyors are made in the USA.
KGF-P 2000, 90 degrees
Two 90-degree KGF-P 2000 conveyors used in an S-fashion.
SBF-P 2254 with Custom Transfer
In this application the product (box) is transferred from the left lane to the right via an overhead pneumatic device.
An example of a GUF-P 2000 cleated belt conveyor used in a hopper application. Hopper is custom designed and includes a clear hinged poly-carbonate cover.
Conveyor with Locating End Stop
Custom nesting and automation on a GUF-P 2000 are part of the accessories and services that set mk apart from the competition.
GUF-P 2000 Multi-Lane Conveyor
Belt conveyors can be used in multi-lane setups; this allows the customer to carry wider products.
Custom Belt Conveyor
This is a custom belt conveyor designed to have an open center.
RBT-P 2065 and Turntable
This line features an RBT-P 2065 conveyor delivering product to another RBT-P 2065 conveyor, which is mounted on a turntable.
GUF-P 2000 Multi-Lane Conveyor
This is an example of the GUF-P 2000 conveyor used in a multi-lane fashion; it includes a fixed end stop.
KFG-P 2000 Incline-Horizontal Conveyor
This is an example of an incline to horizontal KGF-P 2000 conveyor. This belt features sidewalls which helps with product containment.
This is an example of a horizontal to incline to horizontal KGF-P 2000 that is fully movable.
GUF-P 2000 Conveyor with Hopper
The GUF-P 2000 conveyor has a cleated belt for removing product from the custom stainless steel hopper.
KTF-P 2010 Conveyor
This is an example of a VersaMove Plus, KTF-P 2010, chain conveyor with duplex chain.
SBF-P 2254 Conveyor
This is an example of an incline to horizontal bend assembly for the SBF-P 2254 flat top chain conveyor.
GUF-P 2000 with Custom Stops
This conveyor features a pneumatic, custom shaped; product stop with a side pneumatic product justifier.
SBF-P 2254 Multi Level Conveyors
This is an example of SBF-P 2254 conveyors operating on two different levels. Both feature turn-discs in the corners to allow for tighter bend radii.
Custom Driven Roller Conveyor
This is a custom motor driven roller conveyor; which features two curves and an o-ring power transmission system.
SBF-P 2000 Conveyor
Featured here is a SBF-P 2000 conveyor, complete with a 6" wide steel chain.
VersaMove Plus with Lift & Rotate
The pallet is fed off the accumulating roller chain conveyor and onto the ZRF-P 2010 timing belt conveyor which features a Lift & Rotate.
SBF-P 2254 Conveyor
This is a SBF-P 254 table top chain conveyor with two 180-degree curves.
GUF-P 2000 Multi Level System
This is an example of a multi-level GUF-P 2000 flat belt system. Three conveyor levels are shown here.
Side Gripper Conveyors with VST
Two side running conveyors are mounted to a VST linear module which is used to vary the spacing between the conveyor belts.
KTF-P 2010 Attachment Chain Conveyor
This is an example of a KTF-P 2010 attachment chain conveyor with multiple lanes. The lane spacing on this unit are also adjustable.
This flat belt conveyor features telescoping stands and a highly-conductive belt.
This is an example of a GUF-P MINI idler end, 22 mm diameter transfer.
KFG-P 2000 with Hopper
Product is deposited into the hopper on this incline-horizontal conveyor, then travels the length of the conveyor before going down the discharge chute.
This conveyor guard feature clear poly-carbonate guarding mounted into the t-slot of the mk extrusion.
This OEM workcell features four flat belt conveyors (on right) mounted within a machine enclosure.
This is an example of two flat belt conveyors used to transfer product 90-degrees.
Horizontal-incline MBF-P 2040.02 Conveyor
Custom conveyors such as this horizontal-incline plastic modular belt conveyor are available from mk.
A custom hollow pin driven roller conveyor for zero back pressure is available from mk
Custom Bi-Flow Conveyor
SBF-P 2000 conveyors can used as bi-flow tables
mk Turntable DZT-P 2040
mk turntable receives product from a mk flat top chain conveyor.
GUF-P 2000 Flat Belt Conveyors
GUF-P 2000 flat belt conveyors are mk's most popular model
GUF-P 2000 Conveyor with Side Rails
Flat belt conveyors with side rails designed to transfer product 90pdegrees
SBF-P 2000 180 Curve
This is an example of a tight-turn-radius on a 180-curve for a flat top chain conveyor.
This is an example of a ZRF-P 2010 VersaMove Plus, timing belt conveyor, in a stacked fashion; for use with vertical transfer units.
VST Linear Module
This VST linear module is used to move the conveyor mounted to it up and down vertically.
Conveyor with Custom Guard
This is an example of a guard constructed with closed-sided profiles, mounted to a conveyor.
This is an example of a standard 90-degree KGF-P 2040 belt curve conveyor.
LZR and Conveyor
The LZR is used in combination with other linear modules to move a fixture mounted above the conveyor.
DZT-P 2040 Turntable
mk DZT-P 2040 accumulating turntable with a custom laminate surface.
SRF-P 2010 Over Under, VersaMove Plus
SRF-P 2010 accumulating roller chain conveyors, VersaMove Plus, used in an over-under application.
The pallet is transferred from one lane to the other lane via a paddle style pusher.
MBF-P 2040.02 conveyor with a side mounted pin stop and centering device
Custom Vertical Transfer Unit
Dual lane plastic modular belt conveyors as a vertical transfer unit with a gravity roller conveyor
Lift & Transfer in a VeraMove Ultra
A timing belt lift & transfer in a VersaMove Ultra, SRF-P 2012 conveyor.