Incline Conveyors  KFG-P 2000 are manufactured using our structural 50 x 50 mm profile. This conveyor can be readily integrated into new or existing equipment, or be used as a free-standing conveyor for bulk handling and loading applications. The bends are designed in such a way that changing between fixed angles of 15°, 30°, 45° or 60° can be accomplished by simple removal of angle templates. Various configurations such as horizontal to incline or horizontal to incline to horizontal for example are available.

Specifications
      Frame:    50x50 mm structural aluminum profile
      Width:    300 mm (11.8”) to 700 mm (27.6”)
      Length:   310 mm (12.2”) to 4,000 mm (157.5”)
      Load:      Up to 165 lbs. (75 kg)
      Speed:    Up to 260 fpm (80 mpm)
      Available angles for the bends:    15°, 30°, 45° and 60°

Features

• Constructed using our mk 2000 series structural profile
  • 50 mm (1.97”) deep anodized aluminum frame
  • Single t-slot down the length of the frame, per side
• 20 gauge 304 stainless steel slider bed
• Useable belt width is approximately 150 mm (5.91”) less the frame width
• Maintenance free dual-sealed ball bearings
• Compatible with most GUF-P 2000 parts and drives
• Dual top-side guides provide excellent belt tracking through the bend assemblies
• Available in a wide variety of configurations
  • Incline to horizontal
  • Horizontal to incline
  • Horizontal to incline to horizontal
  • And many more
• Wide selection of cleats available in heights ranging from ½” to 3”
• Belts are laterally stiff to provide excellent product supports at the bends
• Choose from either an external side rail or sidewalls integrated onto the belt
• Compatible with all mk 50 system profiles and components and most
  mk 40 system profiles and components
• Large selection of conveyor accessories – stands and side rails to name a few
• CE Models available