The ZRF-P 3000 is a wide timing belt conveyor, designed to precisely move your product to exact locations, reliably and accurately every time. To add to the versatile nature of this conveyor, the ZRF-P 3000 is a truly reversing conveyor, capable of continuous travel in either direction. This wide timing belt conveyor allows you to get the most out of your production and assembly.
Frame: 40 mm tall, single t-slot aluminum extrusion
Pulley: T10 pitch, 16 tooth
Width: 120 mm to 620 mm
Length: 500 mm to 10,000 mm
Load: Up to 300 lbs.
Speed: Up to 500 fpm
Positional Accuracy: ± 0.02"
Indexing Accuracy: ± 0.02"
Voltage: All standard US, Mexico and Canadian voltages
Belting: WT10 Timing Belt with a Reverse V-Guide; available with M4 inserts in the belt or cleats ultrasonically welded to the top surface, also available are a number of belt coatings including nylon and grip top
Accessories: Compatible with all mk side rails and supports
Anodized aluminum frame
40 mm tall, with a single t-slot per side
20 mm integral drive shaft
16 tooth drive pulley
160 mm of belt travel per pulley revolution
Ultra low friction composite slider bed
Frame width is 10 mm wider than the belt width
Features a direct drive for a more precise, and more economical and space saving design
Truly reversible conveyor operation due to a reverse v-guide frame feature
Wide T10 pitch timing belt
Three different types of belt available, see "Options" tab for more information
Indexing and non-indexing motor and controller packages
See "Options" tab for more information
Indexing Package includes a BXII Series brushless DC high performing motor and driver. This package features speed control, positioning capabilities and torque limiting. Input power is 120 VAC, single phase. For digital or analog use. (Digital uses MEX02 software (free download) or OPX-2A control module (sold separately).)
Operating Mode: Incremental or absolute
Operation Functions: Independent, linked, linked 2, sequential, direct
Continuous Operation Package includes a W series gearmotor for three-phase input voltage. This motor can be operated continuous run or indexed, via a separate controller.
Motor voltages: 230, 375, 400, 460 and 575 VAC
Belts can be supplied as with a flat top surface that can be coated or left plain. Belt coatings can be applied to allow for accumulation, or to provide a high grip surface.
Belts can also be supplied with cleats, or profiles, ultrasonically welded to the top surface. These cleats come in a wide variety of styles, can be full or partial width, or custom designed.
If the customer wishes to supply their own cleat or belt attachment, the belts can be supplied with threaded inserts. These inserts have an M4 thread and can be laterally spaced 25 mm on center.
Cleats or inserts need to be positioned over a tooth.